Rendezvous FWD V6-3.5L VIN L (2006)
NOTE: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the
gasket surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
INSTALLATION PROCEDURE
1. Install a NEW throttle body gasket, if necessary.
2. Install the throttle body.
3. Install the throttle body bolts.
NOTE: Refer to Fastener Notice.
Tighten the bolts to 10 N.m (89 lb in).
4. Install the thermostat bypass pipe.