Rendezvous FWD V6-3.5L VIN L (2006)
17. Remove the negative battery cable nut (3) from the transaxle stud.
18. Remove the negative battery cable terminal (4) from the stud.
19. Lower the vehicle.
20. Remove the battery cable assembly from the vehicle.
21. Place the cable assembly on a work bench.
22. Cut the tape around the cable conduit.
23. Open the conduit and remove the negative battery cable.
INSTALLATION PROCEDURE
1. Install the negative battery cable to the conduit.
2. Tape around the cable conduit.
3. Install the battery cable assembly to the vehicle.
4. Raise and support the vehicle.
5. Install the negative battery cable terminal (4) to the transaxle stud.
6. Install the negative battery cable nut to the stud.