Rendezvous FWD V6-3.5L VIN L (2006)
1. Connect the ignition switch electrical connector.
2. Install the ignition switch (1) to the ignition lock cylinder case.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the screws (2) to the ignition switch (1).
^
Tighten the screws to 1.25 Nm (11 inch lbs.).
4. Install the theft deterrent module to the lock cylinder housing.
5. Install the ignition lock cylinder.
6. Install the steering column trim covers.
7. Enable the SIR System.
