Rendezvous FWD V6-3.5L VIN L (2006)
10. Remove the manual 2-1 band servo (106-116).
11. Remove the manual 2-1 band servo cover gasket (105).
12. Disassemble, inspect and service the accumulator and manual 2-1 band servo.
Installation Procedure
1. Install the manual 2-1 band servo cover gasket (105) into the case. Lubricate the manual 2-1 band servo cover gasket with automatic transmission
fluid.
2. Install the manual 2-1 band servo (106-116).
3. Install the manual 2-1 band servo cover (104).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the manual 2-1 band servo cover bolts (103).
^
Tighten the manual 2-1 band servo cover bolts (130) to 25 Nm (18 ft. lbs.).
5. Install the accumulator (132).
6. Install the lube oil pipe (130) into the case at the lube hole for the front differential carrier internal gear.
7. Use a flat-bladed tool in order to lock the lube oil pipe retainer (129) into the case.