Rendezvous FWD V6-3.5L VIN L (2006)
Wheel Bearing: Service and Repair
Wheel Bearing/Hub Replacement - Rear
Wheel Bearing/Hub Replacement - Rear (Disc and AWD)
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the knuckle.
4. Remove the wheel bearing/hub assembly knuckle bolts (1).
5. Remove the wheel bearing/hub assembly (1) from the knuckle (2).
Installation Procedure
1. Install the wheel bearing/hub assembly (1) on to the knuckle (2).