Rendezvous FWD V6-3.5L VIN L (2006)
7. With the aid of an assistant, remove the quarter window (1) from the opening.
Installation Procedure
1. Install a stationary window into the opening. Refer toUrethane Adhesive Installation of Stationary Windows (See: Service and Repair) .
2. Connect the antenna lead located on the rear quarter window, if equipped.
3. Connect the OnStar(TM) Connector located on the rear quarter window, if equipped.
4. Install the upper quarter trim. Refer to Trim Panel Replacement - Rear Quarter Upper (Rendezvous) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) in Interior Trim.
5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
6. Check the radio and the On-Star (TM) system if equipped to verify reception.
7. Close the liftgate window.
