Rendezvous FWD V6-3.5L VIN L (2006)
Washer Fluid Level Switch: Service and Repair
WASHER SOLVENT CONTAINER LEVEL SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Drain the washer solvent from the washer solvent container.
3. Disconnect the washer solvent container level sensor electrical connector.
4. Using a small flat-bladed tool, remove the washer solvent container level sensor and seal from the washer solvent container.
INSTALLATION PROCEDURE
1. Position the washer solvent container level sensor and seal to the washer solvent container pressing in until fully seated.
2. Connect the washer solvent container level sensor electrical connector.
3. Fill the washer solvent container with washer solvent.
4. Close the hood.