buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Power and Ground Distribution > < All Other Service Bulletins for Wiring Harness:|668304A|Page 3584
Page 1
background image

Speedometer Head: All Technical Service Bulletins
Speedometer - Rattle Noise

Bulletin  84-10-23

Date      

Sept. '84

Ref.No. 84-302-10
SUBJECT:

RATTLE IN INSTRUMENT CLUSTERS

MODELS AFFECTED:

1984 REGALS AND RIVIERAS

1984 BUICK G AND E CAR INSTRUMENT CLUSTERS

Cause:

The speedometer frame is rubber mounted for noise reduction. This can allow the speedometer dial flange to make intermittent
contact with the plastic retainer, generating a rattling noise. This is especially true when the speedometer neck is exposed to 
speedometer cable lateral stress. See illustration.

Field Fix:

In the event a customer comments on a rattle, cut off a piece of rubber gasket (1-3/8" long, 1/2" wide) and attach it with adhesive
to the area shown in the illustration.

Production Fix:

Effective 4/16/84, the addition of a rubber channel gasket to the speedometer dial flange was made. Both procedures will
eliminate the rattle..

WARRANTY INFORMATION

Labor Operation:

T5077

Labor Hours:

0.2 hrs.

Trouble Code:

92

Power and Ground Distribution > < All Other Service Bulletins for Wiring Harness:|668304A|Page 3584