Riviera V6-231 3.8L VIN C SFI (1989)
Brake Caliper: Service and Repair
Caliper Assembly
1.
Install bleeder screw.
2.
Lubricate piston seal, piston, caliper bore and dust boot with new brake fluid.
3.
Roll piston seal into seal groove in caliper bore, ensuring seal is fully seated and not twisted.
4.
Install dust boot over piston, ensuring lip of boot engages piston groove.
5.
Install piston in caliper bore, press piston to bottom of bore, then seat boot in caliper counterbore with suitable installer.