Riviera V6-231 3.8L VIN L SFI (1991)
![background image](/buick/riviera/v6-231_3.8l_vin_l_sfi/Page-2381001.png)
Seat Belt: All Technical Service Bulletins
Shoulder Belt - Contacts Driver and Passenger's Neck
Bulletin:
91-10-11
Date:
Feb, '91
Ret. No.: 90-210-10
Corp. Ref. No.: 011617R
SUBJECT:
SHOULDER BELT CONTACTS DRIVER AND FRONT PASSENGER'S NECK (INSTALL A REVISED HEADREST GUIDE LOOP)
MODELS AFFECTED: 1990 - 91 RIVIERA MODELS
Drivers and right front seat passengers of some 1990-91 Rivieras may experience a condition of the shoulder belt contacting or rubbing against the neck.
This condition may be improved by using the following procedure to install a revised headrest guide loop. Use the following chart to select the correct
part number according to color:
Parts are currently available from GMSPO.
Passenger's
Driver's
Color
Side P/N
Side P/N
Dark Sapphire
16705930
16705931
Medium Antelope
16705934
16705935
Dark Auburn
16705938
16705939
Garnet Red
16705940
16705941
Medium Slate Gray
16705942
16705943
1.
Remove the two headrest guide loop mounting screws and remove and discard the old guide loop.
2.
Position the shoulder belt so that it runs through the new guide loop.
3.
Mount the new guide loop on the headrest by installing the original guide loop mounting screws.
4.
Install the passenger side guide loop using the above procedure.
WARRANTY INFORMATION:
Labor Operation No.:
T6497
Labor Time:
.2 hour