Riviera V6-3.8L SC VIN 1 (1995)
3.
Insert the seat heat element harness (3) between the seat cushion (4) and the adjuster assembly (5).
4.
Connect the seat heat element GREEN electrical connector to the Heat Module GREEN electrical connector.
5.
Cut off all of the old heat element harness (6) from the seat back trim cover.
Important:
Ensure the heat element is laying flat with no wrinkles on the seat back cushion pad.
6.
Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Front in the Seats sub-section of the Service Manual.
7.
Ensure the seat heat function is operational.
Seat Cushion Heat Element Replacement - Front
For 1997-2000 Park Avenue and Ultra
1.
Remove the seat cushion cover. Refer to Seat Cushion Replacement - Front in the Seats sub-section of the Service Manual.
