Riviera V6-3.8L SC VIN 1 (1995)
Cruise Control Servo: Service and Repair
REMOVE OR DISCONNECT
1. Electrical connector from servo unit.
2. Vacuum hoses from servo unit.
3. Servo cable from servo unit.
4. Servo to bracket retaining screws.
5. Servo unit.
INSTALL OR CONNECT
1. Servo unit.
Tighten
Screws to 1.6 Nm (15 lb. in.).
2. Servo cable; select hole for minimum cable slack.
3. Vacuum hoses.
4. Electrical connector.