Riviera V6-3.8L SC VIN 1 (1995)
Balance Shaft: Technical Service Bulletins
Balance Shaft - Special Tools and Procedure Revision
File In Section: 6 - Engine
Bulletin No.: 57-61-07
Date: March, 1995
SERVICE MANUAL UPDATE
Subject:
Section 6A - Revised Balance Shaft Special Tools and Procedure
Models:
1988-90 Buick Electra
1988-91 Buick Reatta
1988-93 Buick Riviera
1988-95 Buick LeSabre, Park Avenue, Regal
1995 Buick Riviera
1992-95 Chevrolet Lumina APV
1988-92 Oldsmobile Toronado, Trofeo
1988-95 Oldsmobile Eighty Eight, Ninety Eight
1992-95 Oldsmobile Silhouette
1988-95 Pontiac Bonneville
1992-95 Pontiac Trans Sport
with 3800 Engine (VINs C, L, K, 1 - RPOs LN3, L27, L36, L67)
The special tools used to service the balance shaft assembly has been revised. Kent-Moore will send out the revised tools along with specific instructions
regarding the currently released tools. Use this procedure and the new tools when servicing the balance shaft assembly.
Tools Required:
J 6125-B Slide Hammer (All)
J 21465-13 Drive Handle Extension
J 36996 Balance Shaft Installer
J 36995 Includes:
J 36995-1 Bearing Installer (All)
J 36995-5 Bearing and/or Bushing Remover (All)
J 36995-UPD Includes:
J 36995-2A Balance Shaft Pilot (All)
J 36995-3A Threaded Rod (All)
J 36995-8 Bushing Installer (VIN K, use with J 36995-1)
Remove or Disconnect
