Riviera V6-3.8L SC VIN 1 (1995)
Water Pump: Service and Repair
COOLANT PUMP
Coolant Pump Mounting (V6)
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Drain the cooling system.
3. Drive belt.
4. Coolant hoses at the coolant pump.
5. Coolant pump pulley bolts (Long bolt removed through access hole provided in the body side rail), then remove the pulley.
6. Torque axis mount.
7. Coolant pump attaching bolts and pump.
CLEAN
^
Clean all sealing surfaces.
INSTALL OR CONNECT
1. Using a new gasket, install coolant pump.
2. Torque axis mount.
3. Coolant pump pulley.
4. Coolant hoses onto the pump.
5. Drive belt.
6. Refill the cooling system.
7. Connect negative battery cable.
INSPECT
^
Start and idle engine to check for leaks.