Riviera V6-3.8L SC VIN 1 (1995)
^
Push-to-Seat - Gently pull on the lead to remove the terminal through the back of the connector.
^
Pull-to-Seat - Gently push on the lead to remove the terminal through the front of the connector.
NOTE: NEVER use force to remove a terminal from a connector.
Step 9:
Inspect terminal and connector for damage. Repair as necessary (refer to Terminal Repairs). See: Terminal Repairs
Step 10:
Reform lock tang and reseat terminal in connector body. Apply grease if connector was originally equipped with grease.
Step 11:
Install any CPAs or TPAs, close any secondary locks and join connector halves.
