Riviera V6-3.8L SC VIN 1 (1995)
Throttle Cable/Linkage: Service and Repair
Accel. Control Cable
REMOVE OR DISCONNECT
1. Drivers side sound insulator.
2. Accelerator cable from accelerator pedal.
3. Squeeze accelerator cable retainer and push through bulk head.
4. Accelerator cable from restraints in engine compartment.
5. Accelerator cable from throttle body lever.
INSTALL OR CONNECT
NOTE: To prevent possible interference, flexible components must not be routed within 50 mm (2") of moving parts, unless routing is positively
controlled.
1. Reverse removal procedure.
INSPECT
Check for complete throttle opening and closing positions by operating accelerator pedal. Also check for poor carpet fit under the accelerator
pedal. Throttle should operate freely without bind between full closed and wide open throttle.
2. Apply a heavy bodied sealer around accelerator cable at engine compartment side of bulkhead.