buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Component Tests and General Diagnostics > < Circuit Operation|Page 85
Page 1
background image

Retained Accessory Power: Initial Inspection and Diagnostic Overview
Troubleshooting Hints

TRY FOLLOWING BEFORE DOING SYSTEM CHECK.

1. Check Rear Fuse Block Backup Lamps, IGN-1 and IGN-3 and I/P 1 Fuses by visual inspection. If the I/P 1 Fuse is blown (Oldsmobile only), there

is still a battery feed from the HZRD/STOP Fuse to the Remote Accessory Control Module. Therefore, the Remote Accessory Control Module
may not be completely shut down.

2. Check I/P Fuse Block Fuse RADIO and CHIME Fuses by visual inspection.
^

Refer to System Check for a guide to normal operation.  See: System Check

^

Refer to System Diagnosis for diagnostic tests.  See: System Diagnosis

Component Tests and General Diagnostics > < Circuit Operation|Page 85