Riviera V6-3.8L SC VIN 1 (1995)
![background image](/buick/riviera/v6-3.8l_sc_vin_1/Page-400001.png)
Cruise Control Switch: Diagnostic Aids
Weather Pack(R) Connectors
Typical Weather Pack(R) Connector And Terminal
Follow the steps below to repair Weather Pack(R) connectors.
Step 1:
Separate the connector halves.
Step 2:
Open secondary lock. A secondary lock aids in terminal retention and is usually molded to the connector.
Step 3:
Grasp the lead and push the terminal to the forward most position. Hold the lead at this position.
Step 4:
Insert the Weather Pack(R) terminal removal tool into the front (mating end) of the connector cavity until it rests on the cavity shoulder.
Step 5:
Gently pull on the lead to remove the terminal through the back of the connector.
NOTE: NEVER use force to remove a terminal from a connector.
Step 6:
Inspect the terminal and connector for damage. Repair as necessary (refer to Terminal Repair). See: Terminal Repairs
Step 7:
Re-form the lock tang and reseat terminal in connector body.
Step 8:
Close secondary locks and join connector halves.