Riviera V6-3.8L SC VIN 1 (1995)
Neutral Safety Switch: Service and Repair
1. Set parking brake and set gear selector to the "Neutral position.
2. Remove linkage cable bracket to transaxle shaft retaining nut.
3. Remove linkage cable bracket from transaxle shaft.
4. Remove Park/Neutral position switch attaching bolts.
5. Disconnect Park/Neutral position switch electrical connector.
6. Remove terminal nut on starter solenoid, then disconnect cable from starter.
7. Remove Park/Neutral position switch from vehicle.
8. Reverse procedure to install.
