Riviera V6-3.8L SC VIN 1 (1995)
Steering Gear: Technical Service Bulletins
Tools - Adjuster Locknut Wrench
File In Section: 3 - Steering/Suspension
Bulletin No.: 83-32-10
Date: November, 1998
INFORMATION
Subject:
Essential Tool J 43435 Adjuster Locknut Wrench
Models:
1990-99 Passenger Cars and Trucks with Integral Power Steering
A new essential tool, J 43435 Adjuster Locknut Wrench, has been sent to all GM Dealers. This tool should be used on all Integral power steering gears,
both past and current models.
The following procedure should be used In place of existing Service Manual procedures for Coupling Shield and Locknut Removal and Replacement.
The correct adjustment procedure and use of the essential tools are critical to restore the vehicle "On Center" feel (See Figure 1).
Important:
Coupling shield retainer and locknut assembly replacement procedures require the following special tools:
J 42882 Adjuster Nut Wrench
J 43435 Adjuster Locknut Wrench
