Riviera V6-3.8L SC VIN 1 (1995)
8.
Install 2 mm washer, P/N 22173563, over the lower retainer. See Figure 1.
9.
Replace shock mount with revised shock mount, P/N 22166987. Install revised shock mount onto top of shock.
10.
Install upper retainer and nut (shock shaft to shock mount).
11.
Push up and expand shock into place so that the mount studs go through the shock tower.
12.
Install shock mount nuts and tighten to 20 N.m (15 lb ft).
13.
Tighten center nut to 27 N.m (20 lb ft) (shock shaft to shock mount).
14.
Install shock mount cover.
15.
Connect ELC air line to shock.
16.
Repeat steps 3 - 15 for opposite side shock mount replacement.
17.
Install trunk trim.
18.
Road test to verify concern.
