Riviera V6-3.8L SC VIN 1 (1995)
Wheel Fastener: All Technical Service Bulletins
Wheels - Stud Removal Tool Change
File In Section: 03 - Suspension
Bulletin No.: 99-03-10-103
Date: October, 1999
INFORMATION
Subject:
Discontinue Usage of Tool J 6627-A for Wheel Stud Removal
Models:
1992-99 Buick Riviera
1992-2000 Buick Century, LeSabre, Park Avenue, Regal
1992-2000 Cadillac DeVille, Eldorado, Seville
1992-96 Chevrolet Lumina APV
1997 Chevrolet Corvette (C-5)
1997-2000 Chevrolet Venture
2000 Chevrolet Impala, Monte Carlo
1992-99 Oldsmobile Aurora, Eighty Eight, Regency
1992-2000 Oldsmobile Silhouette
1998-2000 Oldsmobile Intrigue
1992-98 Pontiac Trans Sport
1992-2000 Pontiac Bonneville, Grand Prix
1999-2000 Pontiac Montana
SPECIAL TOOL J 6627-A IS NOT TO BE USED AS THE WHEEL STUD REMOVAL TOOL FOR THE ABOVE VEHICLES.
Notice:
The fingers of J 6627-A extend too far down the back of the wheel hub and bearing assembly. When this tool is used as a wheel stud press, it may
cause damage to the wheel hub inner seal. If the seal is damaged, water intrusion may occur and the life span of the wheel hub and bearing assembly
may be decreased.
Important:
If any seal is damaged, it is recommended that the wheel hub and bearing assembly be replaced.
USE OF EITHER SPECIAL TOOL J 35917 OR J 43631 IS RECOMMENDED IN ORDER TO PROPERLY REMOVE THE WHEEL STUDS ON
THE VEHICLES LISTED ABOVE.
These tools have similar dimensions and differ slightly in appearance, therefore, only one illustration is included.
Notice:
