Riviera V6-3.8L SC VIN 1 (1995)
6. Run glass to full down position, ensuring the front guide channel is free to move.
TIGHTEN
^
Tighten the secondary glass tilt adjuster.
Door Window Adjustment
7. Sitting inside vehicle, close door and run glass slowly, watching the glass run up to and over the rear seal (B-pillar). This check ensures the seal
will not be damaged.
IMPORTANT: If the glass starts to scissor, cut, or dive inside of the rear seal, DO NOT raise the glass further! if this condition exists, the glass
has been tilted too far inboard.
ADJUST
8. Readjust, refer to steps 4-6; if the glass cannot be tilted inboard enough to correct the glass location at full up, the seal retainer must be moved
outboard. if the glass cannot be tilted outboard enough, the seal retainer must be adjusted inboard.
TIGHTEN
^
Tighten stabilizer bracket assembly adjustments, ensuring that the glass guidance module is not moved during the tightening process.
^
Retighten all adjustments.
Glass Fore/AFT Adjustment
GLASS FORE/AFT ADJUSTMENT