Riviera V6-3.8L SC VIN 1 (1995)
Windshield Washer Spray Nozzle: Service and Repair
Fig. 8 Pivot & Pulse Switch Assembly Removal
1. Disconnect battery ground cable.
2. Tilt column to the "CENTER position.
3. Remove three upper steering column cover attaching screws, then the upper cover.
4. Remove two wire straps from steering column wire harness.
5. Disconnect pivot and pulse switch connector from turn signal and multi-function switch wire harness connector.
6. Disconnect pivot and pulse switch harness from wire harness strap.
7. Remove two pivot and pulse switch attaching screws, then the pivot and pulse switch assembly from the column, Fig. 8.
8. Reverse procedure to install.
