Riviera V6-3.8L VIN K (1996)
Lamp Control Module: Technical Service Bulletins
Alarm/Lock/Lighting Module - Replacement Procedures
File In Section: 8 - Chassis/Body Electrical
Bulletin No: 53-83-19
Date: October, 1995
SERVICE MANUAL UPDATE
Subject:
Section 8C - Replacement Procedures for Multi-Function Alarm, Lock and Lighting Module (MALL), Starter Enable Relay and Lamp Control Module
Models:
1996 Buick Riviera
1996 Oldsmobile Aurora
Please insert the following replacement procedures and illustration in Section 80 of the Service Manual.
Multifunction Alarm, Lock and Lighting Module
(MALL)
Remove or Disconnect
1.
Left lower I/P insulator, (2) screws, (1) light bulb.
2.
Electrical connector(s).
3.
MALL module from multi-use bracket. Press down on center tab of mounting bracket and slide MALL module downward until mounting rails
disengage.
Install or Connect
1.
MALL module to multi-use bracket.
^
Align mounting rails on module with mounting bracket rails.
^
Slide module forward into place until locking tab engages.
