Riviera V8-307 5.0L (1982)
3.
To install door trim assembly, pull door inside handle inboard; then position door trim to inner panel, inserting handle through hole in door trim
panel.
4.
Install trim pad over locking rod knob, then firmly engage upper trim pad embossments with front and rear retainers.
5.
Position door trim to inner panel so trim retainers are aligned with attaching holes in inner panel and tap retainers into holes with palm of hand or a
clean rubber mallet.
6.
Install all previously removed hardware items.
To help prevent damage in the future, the thickness of the current belt trim support has been increased from 2.5 to 3.0 mm.
Warranty Information
Labor Operation use door trim pad R & R
Labor Time Trim pad R & R plus .2 hr. for one or both sides
Trouble Code 92
