buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Powertrain Management > < Exhaust Manifold|Specifications|Page 2575
Page 1
background image

Exhaust Pipe/Muffler Hanger: Technical Service Bulletins
Exhaust - Moan/Boom

Bulletin: 93-6-11
Date: March '93
Ref. No.: 93-106-6
Corp. Ref. No.: 336601

SUBJECT:
EXHAUST MOAN/BOOM (INSTALL NEW MUFFLER HANGER ASSEMBLY)

MODELS AFFECTED:
1992-93 ROADMASTER

CONDITION:

Some 1992-93 Roadmasters may exhibit a slight exhaust moan/boom condition, most apparent during light acceleration from 45-55 mph with
transmission in fourth gear and torque converter clutch (TCC) applied.

CAUSE:

Exhaust generated pulsations transmitted into vehicle underbody through the exhaust system hangers.

CORRECTION:

Replace existing muffler hanger assembly with new assembly P/N 10228003. Follow applicable Service Manual Procedures and those noted in
illustration to insure proper installation and system alignment. Torque hanger/frame bolt to 24 N-m (17 lb.ft.) and hanger clamp to 33 N-m (24 lb.ft.).

WARRANTY INFORMATION:

Labor Operation: T3301
Labor Time: 0.6 Hr.

PART AVAILABILITY:

Parts are currently available from GMSPO.

Powertrain Management > < Exhaust Manifold|Specifications|Page 2575