Roadmaster Estate Wagon V8-350 5.7L (1993)
![background image](/buick/roadmaster_estate_wagon/v8-350_5.7l/Page-727002.png)
5. Install the starter and connect the transmission fluid cooler lines at clips on oil pan assembly.
6. Install the flywheel cover and the exhaust crossover pipe at manifold assembly.
7. Lower vehicle and refill crankcase with engine oil of proper type and amount.
8. Install the transmission fluid and engine oil dipsticks then the upper fan shroud, if equipped.
9. Install the right hand electrical center cover.
10. Connect the electrical connector at wiper motor assembly.
11. Install the air cleaner and connect the battery negative cable assembly.
12. Inspect for leaks, after running engine assembly.