Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Coil Spring
Fig. 11 Coil Spring Position
1. Raise and support front of vehicle, then remove wheel and tire assembly. Support vehicle by frame so control arms hang free.
2. On models equipped with anti-lock brake systems, remove right and left wheel speed sensors as follows:
a. Under vehicle hood, disconnect speed sensor electrical harness.
b. Raise and support vehicle, then remove speed sensor harness bracket attaching bolt.
c. Remove speed sensor to steering knuckle attaching bolt, then remove speed sensor and bracket assembly and position aside.
d. Reverse procedure to install. Wheel speed sensors are to installed by hand. Do not hammer sensors into position, as damage may result.