Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
3. Spacer plate (46).
4. Gasket (47) accumulator housing to spacer plate.
5. Accumulator housing assembly (51) onto valve body assembly (44).
6. Six bolts (53) using (8 mm) socket through accumulator housing into valve body assembly.
Torque Sequence And Guide Pin Location
NOTE: Start accumulator housing bolts finger tight and work towards opposite end.
TIGHTEN
^
Bolt (53) to 11 Nm (97 lb. in.).
7. Remove guide pin J 25025-5.
Fig. 11 Check Ball Location.