Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
Valve Body: Service and Repair
Control Valve Assembly
CONTROL VALVE ASSEMBLY
REMOVE OR DISCONNECT
1. Rotate transmission bottom pan surface up and lock in place.
2. Wire harness assembly (34) connectors from components.
IMPORTANT
^
If the wire harness assembly does not need servicing, it is not necessary to remove it from the case.
^
Use a cap to cover electrical pin at case connection.
3. Six bolts (76) using 8 mm socket, and transmission fluid pressure switch assembly (40).
NOTICE: Be sure five 0-rings are attached to transmission fluid pressure switch assembly.