Skyhawk L4-112 1.8L Turbo VIN J FI (1984)
FIGURE 3
PROCEDURE - OUTLET, DASH VENT PANEL REPLACEMENT (FIGURE NO. 3)
6.
Loosen sealing strip on dash extension as required and remove water deflector.
7.
Disconnect vent outlet extension from dash panel vent outlet.
8.
Remove dash panel vent outlet and install new service replacement.
9.
Connect vent outlet extension to dash panel vent outlet.
10.
Reinstall sealing strip and water deflector. Care must be taken to engage rear snap-in of water deflector into vent outlet pins.