buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Customer Interest:|82T114A|Page 4619 > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 4613
Page 1
background image

Grille: Customer Interest
Front End Panel - Distortion

Model Year  1982

Bulletin No.  82-T-114A

File in Group  20

Number  8A

Date  Aug. '83
SUBJECT:

FRONT END PANEL DISTORTION

MODELS AFFECTED:

1982 SKYHAWK

NOTICE:

This bulletin supersedes Bulletin 82-T-114, File Group 20, Number 8, dated October, 1982. Please discard Bulletin 82-T-114 and replace it
with this one.

The front end panel on 1982 Skyhawk models may distort away from its retainers above the headlamps. Retainer brackets have been released to hold the
front end panel in place.

These retainer brackets may be obtained through WDDGM by ordering the following part numbers:

-

Bracket, Right Side        25516536

-

Bracket, Left Side         25516537

The brackets can be installed using the following procedure:

1.

Remove headlight bezel.

Customer Interest:|82T114A|Page 4619 > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 4613