Skyhawk L4-121 2.0L VIN K TBI (1987)
FIGURE 2
11.
With shield in position, ensure at least 2 mm clearance to the distributor cap (See Figure 2, View A). Bend engine lift bracket if required for
minimum clearance. SHIELD MUST NOT CONTACT DISTRIBUTOR CAP.
12.
Torque lift bracket nuts 40-60 N-m (30-45 ft.lbs.).
13.
Torque lower coil bolts 20-30 N-m (15-22 ft.lbs.).
14.
Connect electrical wiring at coil. COIL WIRE NIPPLE MUST NOT CONTACT SHIELD.
15.
Install air cleaner.
16.
Connect negative battery cable.
17.
Install campaign identification label.
