Skyhawk L4-121 2.0L VIN K TBI (1987)
FIGURE 1 - (COIL WIRE SHIELD NOT SHOWN)
7.
Install new coil bracket bolt (top) (30 mm long) and attach lift bracket (pencil) brace and nut from service kit (See Figure 1).
8.
Position lift bracket, coil and coil wire shield on engine, and attach end of pencil brace to front lift bracket stud.
9.
Install new lift bracket nuts (washer faced) to studs.
10.
Torque coil bracket nut first to position pencil brace 20-30 N-m (15 - 22 ft.lbs.).