Skyhawk L4-121 2.0L VIN K TBI (1987)
Throttle Valve Cable/Linkage: Adjustments
Models Less Lock Tab Adjusting Cable
Fig. 2, TV cable adjuster. Models less lock tab adjusting cable
PROCEDURE
1. Ensure cable is in "Non-Adjusted" position (figure 2).
2. Without twisting or kinking cable, insert cable slug into idler pulley (cam) slot.
3. Using a suitable torque wrench, rotate idler pulley (cam) counterclockwise to 7.3 Nm (65 in lbs).
4. Ensure cable moves freely, then test drive vehicle after the engine is fully warmed up.