Skyhawk L4-121 2.0L VIN P TBI (1984)
Seat Track: All Technical Service Bulletins
Manual Seat Adjuster - Lateral Movement
Bulletin:
84-10-26A
Date:
Apr..'85
Ref. No. 85-091A-10
SUBJECT:
MANUAL SEAT ADJUSTER LATERAL MOVEMENT
MODELS AFFECTED: 1983 & 1984 SKYHAWK (EXCEPT EASY ENTRY)
NOTICE:
This bulletin supersedes 84-10-26 dated February, 1985, to provide part numbers for the passenger side outer adjusters. Please discard
original bulletin and replace it with this one.
If a lateral movement of the inner seat adjuster is experienced, perform the following operations.
1.
Remove seat and place on a clean protected surface.
2.
Replace seat adjuster(s) with new adjuster(s).
P/N 20329374
Passenger Outer (Coupe)
P/N 20329375
Passenger Outer (Sedan)
P/N 20162884
Passenger Inner (Coupe)
P/N 20162885
Passenger Inner (Sedan)
P/N 20330804
Driver's Inner (Coupe)
P/N 20330805
Driver's Inner (Sedan)
3.
Install release wire (P/N 20162898) between lock bars.
4.
If the adjuster to floor attaching stud is loose in the floor, weld the stud (mig or gas with steel rod only) into place using standard body shop repair
procedure for structural components.
5.
Install seat to floor and torque seat adjuster-to-floor pan attaching nuts 20 to 28 N-m (15 to 21 ft. lb.).