Skylark L4-138 2.3L DOHC VIN D MFI (1988)
Crankshaft Position Sensor: Technical Service Bulletins
1987-92 Service Manuals - Step 13
^
Connect a DVM between terminals "B" and "C" of IDI module harness.
^
Measure the combined resistance value of the crank sensor and crank sensor harness.
^
Resistance should be between 500 and 900 ohms.
^
Crank the engine and observe voltage (AC scale).
^
Reading should be greater than 200 mV. Are both the DVM readings within the given values?