Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
Cruise Control Servo Cable: Adjustments
Control Cable
1.
Ensure cable assembly in cable and servo bracket.
2.
Pull servo assembly cable and toward servo without moving throttle body lever.
3.
If one of the holes in the servo tab aligns with cable pin, connect pin to tab with retainer.
4.
If tab hole does not align with pin, move cable from servo assembly until next closest tab hole lines up, then connect pin to tab with retainer. Do
not stretch cable to make adjustment, as the engine will not be able to return to idle.
