buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Powertrain Management > < All Technical Service Bulletins for Muffler:|896F2
Page 1
background image

Muffler: Customer Interest
Exhaust - Rattle From Muffler

Bulletin 
89-6F-2 

Date 
July, '89 

Ref. No. 
89-187-6F 

Corp. Ref. No. 
976601

SUBJECT:
EXHAUST SYSTEM RATTLE (INSTALL WASHER TO TIGHTEN BELLY BAND AROUND MUFFLER)

MODELS AFFECTED:
1989 SKYLARKS

Customers may comment about a rattle type noise coming from the rear of the vehicle. This noise may be caused by the muffler strap or belly band, not
being sufficiently tight around the muffler, which can result in a rattle between the muffler and belly band.

This condition can be corrected by installing washer, part number 14034623, as shown in Figure 1, and tightening to 16 N-m (12 lbs.ft.). Part is currently
available from GMSPO.

IMPORTANT:
The belly band must be properly positioned between the locating dimples on the muffler.

WARRANTY INFORMATION

Labor Operation Number:
T4652
Labor Hours:
.2 hr.
Trouble Code:
92

Powertrain Management > < All Technical Service Bulletins for Muffler:|896F2