Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
7.
Use urethane sealer, P/N 12345633, or equivalent, and seal wire bundle to pass-through plastic base as shown in Figure 1. Also seal between any
wires not sealed by the clear hot melt glue.
8.
Re-tape harness up to and surrounding the plastic shell of harness pass-through with electrical tape.
9.
Close hood.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation: T3378
Labor Time: .4 Hr.
