Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Brake Caliper: Service and Repair
Overhaul
DISASSEMBLE
1. Remove caliper completely from vehicle.
2. Bushings. Inspect Bushings for cuts and nicks. Replace if damaged. Use clean shop towels to pad the interior of the caliper housing during
removal.
CAUTION: On the following procedure do not place fingers In front of the piston in an attempt to catch or protect it when applying compressed
air. This could result In serious injury.
3. Piston using compressed air into the caliper inlet hole. Inspect Piston for scoring, nicks, corrosion and worn or damaged chrome plating. Replace
piston if any of these conditions are found.