Skylark L4-144 2.4L DOHC VIN T SFI (1997)
19. Remove the coolant pump to timing chain housing nuts.
20. Remove the coolant pump and cover assembly.
21. Remove the coolant pump cover to coolant pump assembly bolts.
22. Clean all sealing surfaces.
Installation Procedure
Important: Before you install the coolant pump, read the entire procedure. Pay special attention to the tightening sequences in order to avoid part
damage and to provide proper sealing.
1. Install the coolant pump cover to the coolant pump assembly.
2. Install the coolant pump cover to coolant pump bolts. Hand tighten the bolts.