Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Camshaft Housing: Service and Repair
Camshaft Housing Oil Gallery Plugs
TOOL REQUIRED
^
J 37868 Oil Gallery Plug Installer
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the camshaft housing.
3. Disassemble the oil gallery plug as follows:
a. Using a 8.33 mm (21/64 inch) bit, drill the oil gallery plug.
b. With a 10.0 mm (0.3937 inch) bottoming tap, thread the plug.
c. Install a 10.0 mm bolt into the plug and pull the plug out.
4. Clean the oil gallery plus hole.
INSTALLATION
1. Assemble the oil gallery plug with the Oil Gallery Plug Installer.
2. Install the camshaft housing.
3. Connect the negative battery cable.