Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Balance Shaft Chain: Testing and Inspection
Drive Chain
1. Clean the balance shaft drive chain parts in cleaning solvent. Remove the varnish, sludge and dirt.
2. Inspect the balance shaft drive chain for the following conditions:
^
Damaged links
^
Chain length
CAUTION: Do not attempt to remove a link from the chain. The chain may be weakened and may fail, resulting in a loss of oil pressure and
engine damage.
3. Replace the chain and sprockets if the chain tension cannot be adjusted to specification before the chain hits the housing or the guide comes to the
end of its travel.
