Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Timing Chain: Service and Repair
Procedure
Important:
Read the entire procedure before removing the timing chain.
1.
Mark the timing chain and the crankshaft sprocket outer surfaces for reassembly. Ensure that this is done in order to prevent noise and increased
wear on the chain.
2.
Remove the timing chain guides. See Figure 1.
3.
Remove the timing chain tensioner block and tensioner.
4.
Remove the timing chain tensioner shoe from the stud. Use a small locking ring plier to engage the hole in the locking tab to remove the shoe from
the stud. See Figure 2.
