Skylark L4-144 2.4L DOHC VIN T SFI (1997)
10. Install the engine mounting bracket adapter.
NOTICE: This bolt is designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of
fastener. Do not use a bolt that is stronger in this application. If the correct bolt is not used, the parts will not be tightened correctly. The system or
the components may be damaged.
IMPORTANT: These bolts must be replaced with new bolts anytime they are removed.
11. Install the engine mounting bracket adapter bolts.
^
Tighten the bolts to 60 Nm (44 lb ft) + 60 degrees. Use the J36660
12. Install the engine mount assembly.
13. Remove the J28467-400 and the J28467-360
14. Install the drive belt.
15. Install the coolant surge tank.
16. Add coolant. Refer to Draining and Filling Cooling System.
17. Connect the negative battery cable.
