Skylark L4-144 2.4L DOHC VIN T SFI (1997)
7. Tighten the timing chain housing block fasteners.
^
(1) (M8 X 1.25 X 25) 26 Nm (19 lb ft).
^
(2) (M8 X 1.55 X 55) 50 Nm (37 lb ft).
^
(3) (M10 X 1.25 X 35) 29 Nm (21 lb ft).
8. Tighten the oil pan to the timing chain housing bolts.
^
(1) (M8 X 1.25 X 80) 24 Nm (18 lb ft).
^
(2) (M8 X 1.24 X 22) 24 Nm (18 lb ft).
^
(3) (M6 X 1.00 X 25) 12 Nm (106 lb ft).
^
(4) 26 Nm (19 lb ft).
9. Install the lowest front cover retaining stud into the timing chain housing.
10. Install the coolant pump to the timing chain housing and the timing chain housing nuts. Tighten the timing chain housing nuts to 26 Nm (19 lb ft).
11. Lower the vehicle.
12. Tighten the timing chain housing to the camshaft housing bolts.
^
(1) (M8 X 1.25 X 25) 26 Nm (19 lb ft).
^
(2) (M10 X 1.55 X 55) 50 Nm (37 lb ft).
^
(3) (M8 X 1.25 X 35) 29 Nm (21 lb ft).
13. Install the camshaft sprockets. The camshaft sprockets are identical and interchangeable.
14. Install the camshaft sprocket bolts and the washers.
15. Tighten the camshaft sprocket bolts and the washers while holding the sprocket with the crankshaft balancer holder. Tighten the camshaft sprocket
