Skylark L4-144 2.4L DOHC VIN T SFI (1997)
7.
Tighten the short bolt to 10 N.m (89 lb in.).
8.
Install the Balance Shaft Drive Chain Tensioner Shoe and the Balance Shaft Drive Chain Cover using procedures outlined in Section 6A7 or the
Engine Mechanical Section of the appropriate Service Manual.
Important:
Do not use excessive pressure when installing the Balance Shaft Drive Chain Tensioner. Excessive Balance Shaft Drive Chain tension will
result in noise and wear concerns.
9.
Reinstall the Engine Oil Pan and the Radiator Outlet pipe, Refer to Section 6A7 or the Engine Mechanical Section of the appropriate Service
Manual.
Parts Information
Whenever ordering parts, refer to the following part number:
GM Part Number
Description
24577081
Cover Assembly, Engine
Oil Pump
Warranty Information
For vehicles repaired under warranty, use one of the applicable warranty labor operation numbers as shown.