Skylark L4-144 2.4L DOHC VIN T SFI (1997)
5. Lubricate the o-ring on the radiator outlet pipe with an antifreeze solution.
5.1. Slide the outlet pipe into the coolant pump cover.
5.2. Install the bolts. Hand tighten the bolts.
6. Tighten the coolant pump assembly to timing chain housing nuts.
7. Tighten the coolant pump cover to pump assembly.
8. Tighten the coolant pump cover to engine block. Tighten the bottom bolt first.
9. Tighten the radiator outlet pipe assembly to coolant pump cover.
10. Using new gaskets, install the exhaust manifold.
11. Install the exhaust manifold to cylinder head retaining nuts.
12. Connect the brake vacuum pipe to the cam housing.
13. Raise the vehicle.
14. Index the exhaust manifold bolts into the exhaust pipe flange.
15. Install the exhaust pipe to the exhaust manifold.
16. Install the heater outlet pipe bracket to the transmission.
17. Turn both bolts in evenly in order to avoid cocking the exhaust pipe and binding the bolts. Turn in the bolts until the bolts are fully seated.
